NC Straightening Roll Feeder

The feeder adopts electric eye loop control system,feed and straightener rolls with a hard chrome finished,etc..

Features:

The standard accessory of the feeder is as follows:

1.Electic eye loop control system

2.Feed and straightener rolls with a hard chrome finished

3.Outgoing catenary to assist and support the material

4.Feeding line easily adjusts by advanceworm gear screw jacks device

5.Referrence in dicator adjuster

Material thickness:0.3 to 2.2mm

                  Width:300 to 400 mm

Option Accessory:

1.Hdraulic mandrel expansion

2.Die-high electric conditoning

3.Uncoiler-inverter device

4.Hydraulic material feed-in cart

5.Hold down arms device

6.The uncoil contain the butterfly brakes air compressor

standard technical specification:mm
type	NCMA-300	NCMA-400	NCMA-500	NCMA-600	NCMA-700	NCMA-800
material thickness	0.3-2.2mm	0.3-2.2mm	0.3-2.2mm	0.3-2.2mm	0.3-2.2mm	0.3-2.2mm
material width	30-300mm	30-400mm	30-500mm	30-600mm	30-700mm	30-800mm
feeding roller	2set	2set	2set	2set	2set	2set
straightener roller	upper 4 / lower 3
product speed	16m/min	16m/min	16m/min	16m/min	16m/min	16m/min
coil weight	1000	1000
coil I.D.	450-530	450-530	450-530	450-530	450-530	450-530
coil O.D	1200	1200	1200	1200	1200	1200
servo motor	AC1.8KW	AC1.8KW	AC1.8KW	AC2.9KW
uncoil motor	0.75KW	0.75KW	0.75KW	0.75KW
feeding direction	customer request±100
coil expand	manual	manual	manual	manual	manual	manual
air pressure	5kgf/cm2	5kgf/cm2	5kgf/cm2	5kgf/cm2	5kgf/cm2	5kgf/cm2
power	AC220V 3phase	AC220V 3phase	AC220V 3phase	AC220V 3phase	AC220V 3phase	AC220V 3phase
machine dimension	3.2*1.6*1.6	3.2*1.9*1.6

NC Straightening Roll Feeder